DPC-20 Digital Servo Programmer - Software Instructions

June 01, 2025 | New Release, Technology

DPC-20 DIGITAL SERVO PROGRAMMER

Compatible Software for CAN / DroneCAN, RS-485 & PWM Protocols

Hitec’s DPC-20 Servo Programmer offers an innovative web-based platform to let you control and configure your Hitec digital servos with the ease of USB-C connectivity and your favorite internet accessible device. You’ll always have access to the latest features and security enhancements without manual intervention or worry. A security protocol features robust measures such as encrypted connections and user authentication to protect sensitive data, prevent unauthorized access and reduce security risks. With a user-friendly interface to enhance your experience, all standard DPC programming functions are available including:

End Point Adjustments
Direction
Fail Safe
Dead Band
Speed (Slower)
Soft Start Rate
Overload Protection
Data Save / Load
Program Reset

SHOP NOW

IMPORTANT INFORMATION

Hardware Type: PC USB-C to 3-pin (PWM/TTL) and 4-pin (RS485/CAN) interface.
Capable of configuring and testing HITEC digital servo actuators.
Compatible with various control methods (PWM, RS485, CAN, DroneCAN), offering a seamless transition from legacy DPC-11, DPC-485, and DPC-CAN units.
Different servo actuator series require dedicated UI programs due to variations in communication protocols.
Ensure you connect the appropriate power supply to the DPC-20 for the connected servo actuator.
For servo actuators (5/7 Series, 9 Series, D/MD Series), connect to the 3-pin port on the DPC-20, and connect the power supply to the BAT- and BAT+ pins on the 4-pin port, paying careful attention to polarity.
DPC-20 Wiring Diagrams are located on the DPC-20 UI HUB DOCUMENTATION.

COMPLETE INSTALLATION INSTRUCTIONS & SOFTWARE DOWNLOAD

DPC-20 UI HUB DOCUMENTATION > CLICK HERE

The DPC-20 is an integrated programmer capable of testing and configuring servo actuators using PWM, TTL, RS485, CAN and DroneCAN communication protocols. Unlike traditional programmers, DPC-20 offers a unified platform to seamlessly interact with various servo actuator series. This programmer is compatible with various Hitec servo actuator series including:

HS-5/7/9XXX Series
D/MD Series
D/MD-485 Series
CAN / DroneCAN Series

UI SOFTWARE COMPATIBLE WITH WINDOWS ONLY

Not compatible with macOS, Linux or other operating systems.

INSTALL DPC-20 UI HUB SOFTWARE ONLY

NOTE: Please disconnect the USB cable from the DPC-20 and reconnect it when changing the UI.

DPC-20 Digital Servo Programmer - Software Instructions