MDB1200WP
30mm, Waterproof, Brushless, Metal Case, Steel Gear Actuator (7.4V)
Our MDB1200WP industrial actuator offers a contactless magnetic encoder, brushless motor and IP67-certified water & dust-proof protection, making it suitable for many demanding industrial applications. This 30mm powerhouse delivers over 1500 oz-inches of torque at 7.4V and features an aluminum alloy case to dissipate heat, two ball bearings and five hardened steel gears, and PWM control protocol. Program numerous parameters to optimize the installation and performance for your industrial applications.
Part #: 40147
$609.99
| Performance Specifications | |
|---|---|
| Command Protocol |
PWM |
| Operating Voltage (V) |
Min: 6.00
Max: 7.40 |
| Weight (g) | Min: 260.00 |
| Stall Torque (kgf•cm / oz•in) |
Min: 100.0 / 1388.74
Max: 110.0 / 1527.58 |
| No Load Speed (sec/60°) |
Min: 0.22
Max: |
| Running Current (mA) |
Min: 500
Max: |
| Stall Current (mA) |
Min: 4,300
Max: |
| Circuit |
Digital |
| Rotation |
Programmable |
| Operating Voltage (V) |
Min: 6.00
Max: 7.40 |
| Torque Range |
Min (KG/CM): 110.00
Max (N/CM): 1072.40 |
| Max Speed (SEC/60) | 0.18 |
| Physical Specifications | |
|---|---|
| Case Size (mm) | 30.00 |
| Dimensions (mm) | 62.0 x 30.0 x 47.0 |
| Weight (g) | 260.00 |
| Motor Type | Brushless |
| Potentiometer |
Magnetic Encoder |
| Gear Material | 5 Hardened Steel Gears |
| Horn Gear Spline | 15T (Ø8) |
| Case Material | Aluminum Alloy |
| IP Rating |
IP67 |
Contact Sales directly for accessories and/or replacement parts:
• Case Set
• Gear Set
• Horn Set
General Sales
sales@hiteccs.com
Standard Programming Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Overload Protection
- Data Save / Load
- Program Reset
IMPORTANT INFORMATION > DPC-20 PROGRAMMER
- Hardware Type: PC USB-C to 3-pin (PWM/TTL) and 4-pin (RS485/CAN) interface.
- Capable of configuring and testing HITEC digital servo actuators.
- Compatible with various control methods (PWM, RS485, CAN), offering a seamless transition from legacy DPC-11, DPC-485, and DPC-CAN units.
- Different servo actuator series require dedicated UI programs due to variations in communication protocols.
- Ensure you connect the appropriate power supply to the DPC-20 for the connected servo actuator.
- For servo actuators (5/7 Series, 9 Series, D/MD Series), connect to the 3-pin port on the DPC-20, and connect the power supply to the BAT- and BAT+ pins on the 4-pin port, paying careful attention to polarity.
- DPC-20 Wiring Diagrams are located on the DPC-20 UI HUB DOCUMENTATION.
Additional downloads can be found on our ACTUATOR RESOURCES page under our Support tab.
Contact Sales directly if you are unable to locate a specific resource download:
General Sales
sales@hiteccs.com
