SG33BLT-CAN-12V-GLAND-CABLE

33mm, Waterproof, Brushless, High Torque Actuator with Gland Cable (12V)

The mighty Hitec SG33BLT Series servo actuators operate on DroneCAN (formerly UAVCAN), CAN 2.0 A/B, RS485, PWM and TTL command protocols, and feature brushless motors, magnetic encoders, and hardened steel gears. They are also environmentally sealed with an IP67 waterproof case rating. The SG33BLT Series was initially developed for the automotive industry requiring minimal support equipment and wiring, saving unnecessary installation complexity, cost and weight. This same functionality is now enjoying widespread adoption of CAN and DroneCAN systems within the UAV environment. With options for both 9~15-volt and 18~32-volt operations, and DB9SUB, Circular, & Gland Cable connectivity, the SG33BLT Actuator Series is sure to have a solution for your needs. 

Part #: 40033C
Weight: 1.45 lbs / 0.657575 kg

$1320.00

QTY:

Maximum of 20 units per part # are available for purchase on our website.
Contact Sales directly to discuss purchases over 20 units:



Actuator Sales
Seth Cohen
seth.cohen@hiteccs.com
(858) 737-9220 x311


General Sales
sales@hiteccs.com

 

Performance Specifications  
Command Protocol CAN
DroneCAN / UAVCAN v0.0
Operating Voltage (V) Min: 9.00
Max: 15.00
Weight (g) Min: 400.00
Stall Torque (kgf•cm / oz•in) Min: 147.0 / 2039.22 @ 12V
Max: 147.0 / 2039.22 @ 12V
No Load Speed (sec/60°) Min: 0.185 @ 12V
Max:
Running Current (mA) Min: 500 @ 12V
Max:
Stall Current (mA) Min: 10000 @ 12V
Max:
Circuit Digital
Rotation Programmable
Operating Voltage (V) Min: 9.00

Max: 15.00
Torque Range Min (KG/CM): 162.20

Max (N/CM): 1590.90
Max Speed (SEC/60) 0.17
Physical Specifications  
Case Size (mm) 33.00
Dimensions (mm) 64.0 x 33.0 x 95.0
Weight (g) 400.00
Motor Type BLDC
Potentiometer Magnetic Encoder
Gear Material 1MPM & 3 Hardend Steel
Horn Gear Spline Square 6.5 x 6.5
Case Material Rugged Aluminum Alloy
IP Rating IP67

Contact Sales directly for accessories and/or replacement parts:

• Case Set
• Gear Set
• Horn Set


Actuator Sales
Seth Cohen
seth.cohen@hiteccs.com
(858) 737-9220 x311

General Sales
sales@hiteccs.com

• End Point Adjustments
• Direction
• Fail Safe
• Dead Band
• Speed (Slower)
• Soft Start Rate
• Overload Protection
• Data Save / Load
• Program Reset

DroneCAN / UAVCAN v0.0 Serial Protocol Download
Manual  

CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Servo Actuator Control Protocol Manual – Ver. 2.0 (Updated: 12/16/20)

Download Now
Integration Guide  
ArduPilot Integration & Log Analysis Download Now
Configuration Procedure - Node ID, Stream Rates & End Points Download Now
Hitec Commercial Solutions - Update Procedure Download Now
Configuration App  
Download the following app to configure your actuator:
CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Configuration App – Ver. 2021.1.12.1
Download Now
Firmware  
CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 App Firmware Update – Ver. 2021.1.12.1 Download Now
DroneCAN / UAVCAN v0.0 Firmware – Ver. 21.4.2 Download Now
CAN(2.0A, 2.0B) Serial Protocol Download
Manual  

CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Servo Actuator Control Protocol Manual – Ver. 2.0 (Updated: 12/16/20)

Download Now
Configuration App  
Download the following app to configure your actuator:
CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Configuration App – Ver. 2021.1.12.1
Download Now
Firmware  
CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 App Firmware Update – Ver. 2021.1.12.1 Download Now
CAN Firmware – Ver. 11.4.2 Download Now

ELEVATE YOUR AERIAL EXPECTATIONS.

Our skilled staff of FAA Part 107 certified pilots provides end-to-end aerial services for a variety of customers in an array of industries. Using a myriad of drone platforms, we deliver quality aerial data and actionable information designed to change the way you collect, analyze and share intelligence.

LEARN MORE ABOUT OUR DRONE SERVICES