MD250MW-CAN
15mm, Cored with Carbon Brushes, Wide Voltage, Metal Gear, Mini Servo
The MD250MW is a 15mm, metal gear, mini servo with dual ball bearings and a cored motor with carbon brushes. Engineered with a programmable digital amplifier and magnetic encoder to deliver high performance and reliability for remote, unmanned aerial vehicles and ground-based automation applications. Operating via CAN command protocol at a wide voltage range from 4.8~7.4 volts, this compact actuator produces impressive torque and high speeds in its mini class. The MD250MW servo is ideal for a variety of applications requiring an efficient balance of performance and cost.
Part #: 40250C
Weight: 0.10 lbs / 0.04535 kg
$97.87
Maximum of 20 units per part # are available for purchase on our website.
Contact Sales directly to discuss purchases over 20 units:
Actuator Sales
sales@hiteccs.com
| Performance Specifications | |
|---|---|
| Command Protocol |
CAN |
| Operating Voltage (V) |
Min: 4.80
Max: 7.40 |
| Weight (g) | Min: 31.00 |
| Stall Torque (kgf•cm / oz•in) |
Min: 4.9 / 68.42
Max: 7.5 / 104.72 |
| No Load Speed (sec/60°) |
Min: 0.2
Max: 0.13 |
| Running Current (mA) |
Min: 110
Max: 190 |
| Stall Current (mA) |
Min: 1000
Max: 1600 |
| Circuit |
Digital |
| Rotation |
Programmable |
| Operating Voltage (V) |
Min: 4.80
Max: 7.40 |
| Torque Range |
Min (KG/CM): 7.50
Max (N/CM): 73.50 |
| Max Speed (SEC/60) | 0.13 |
| Physical Specifications | |
|---|---|
| Case Size (mm) | 15.00 |
| Dimensions (mm) | 35.0 x 15.0 x 33.0 |
| Weight (g) | 31.00 |
| Motor Type | DC (Cored Cabon Brush) |
| Potentiometer |
Magnetic Encoder |
| Gear Material | 1 Metal-Plastic & 4 Steel |
| Horn Gear Spline | H25T (25 Segment / Ø6.0) |
| Case Material | Engineering Plastic |
| IP Rating |
N / A |
Contact Sales directly for accessories and/or replacement parts:
• Case Set
• Gear Set
• Horn Set
Actuator Sales
sales@hiteccs.com
• End Point Adjustments
• Direction
• Fail Safe
• Dead Band
• Speed (Slower)
• Soft Start Rate
• Overload Protection
• Data Save / Load
• Program Reset
| DroneCAN / UAVCAN v0.0 Command Protocol | Download |
|---|---|
| Wiki | |
|
Command Protocol Support |
More Information |
| Manual | |
|
CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Servo Actuator Control Protocol Manual v2 (Updated: 06/21/23) |
Download Now |
| Library | |
|
Hitec CAN Servo Register Header (hitec-can-servo-reg-public.h) |
Download Now |
| Configuration App | |
| Download the following app to configure your actuator: CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Configuration App – Ver. 2021.1.12.1 |
Download Now |
| Firmware | |
| CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 App Firmware Update – Ver. 2021.1.12.1 | Download Now |
| CAN Firmware – Ver. 11.4.2 | Download Now |
| CAN(2.0A, 2.0B) Command Protocol | Download |
|---|---|
| Wiki | |
|
Command Protocol Support |
More Information |
| Manual | |
|
CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Servo Actuator Control Protocol Manual v2 (Updated: 06/21/23) |
Download Now |
| Library | |
|
Hitec CAN Servo Register Header (hitec-can-servo-reg-public.h) |
Download Now |
| Configuration App | |
| Download the following app to configure your actuator: CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 Configuration App – Ver. 2021.1.12.1 |
Download Now |
| Firmware | |
| CAN(2.0A, 2.0B) & DroneCAN / UAVCAN v0.0 App Firmware Update – Ver. 2021.1.12.1 | Download Now |
| CAN Firmware – Ver. 11.4.2 | Download Now |
ELEVATE YOUR AERIAL EXPECTATIONS.
Our skilled staff of FAA Part 107 certified pilots provides end-to-end aerial services for a variety of customers in an array of industries. Using a myriad of drone platforms, we deliver quality aerial data and actionable information designed to change the way you collect, analyze and share intelligence.
LEARN MORE ABOUT OUR DRONE SERVICES