HSB-9380TH
20mm, High Torque, Brushless, High Voltage, Titanium Gear Actuator (7.4V)
Our high-performance HSB-9380TH industrial actuator features a brushless motor for maximum efficiency and durable machined aluminum-composite case to dissipate heat. Optimized to deliver over 540 oz-inches of torque, the HSB-9380TH also offers dual ball bearings, three titanium gears, Digital amp with MOSFET. drive, and PWM protocol. Program numerous parameters to optimize the installation and performance for your specific needs. This is a reliable and easy to use option for many demanding industrial applications.
Part #: 39383S
$219.99
| Performance Specifications | |
|---|---|
| Command Protocol |
PWM |
| Operating Voltage (V) |
Min: 6.00
Max: 7.40 |
| Weight (g) | Min: 68.00 |
| Stall Torque (kgf•cm / oz•in) |
Min: 39.0 / 541.59
Max: 39.0 / 541.59 |
| No Load Speed (sec/60°) |
Min: 0.17
Max: 0.14 |
| Running Current (mA) |
Min: 250
Max: 250 |
| Stall Current (mA) |
Min: 2700
Max: 2100 |
| Circuit |
Digital |
| Rotation |
Standard |
| Operating Voltage (V) |
Min: 6.00
Max: 7.40 |
| Torque Range |
Min (KG/CM): 34.00
Max (N/CM): 0.00 |
| Max Speed (SEC/60) | 0.14 |
| Physical Specifications | |
|---|---|
| Case Size (mm) | 20.00 |
| Dimensions (mm) | 40.0 x 20.0 x 38.0 |
| Weight (g) | 68.00 |
| Motor Type | Coreless Metal Brush |
| Potentiometer |
Conventional |
| Gear Material | 1 Metal-Plastic & 3 Titanium Alloy |
| Horn Gear Spline | 24 Segment / Ø5.76 |
| Case Material | Engineering Plastic / Aluminum |
| IP Rating |
IP54 |
Contact Sales directly for accessories and/or replacement parts:
• Case Set
• Gear Set
• Horn Set
Actuator Sales
sales@hiteccs.com
Standard Programming Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Overload Protection
- Data Save / Load
- Program Reset
IMPORTANT INFORMATION > DPC-20 PROGRAMMER
- Hardware Type: PC USB-C to 3-pin (PWM/TTL) and 4-pin (RS485/CAN) interface.
- Capable of configuring and testing HITEC digital servo actuators.
- Compatible with various control methods (PWM, RS485, CAN), offering a seamless transition from legacy DPC-11, DPC-485, and DPC-CAN units.
- Different servo actuator series require dedicated UI programs due to variations in communication protocols.
- Ensure you connect the appropriate power supply to the DPC-20 for the connected servo actuator.
- For servo actuators (5/7 Series, 9 Series, D/MD Series), connect to the 3-pin port on the DPC-20, and connect the power supply to the BAT- and BAT+ pins on the 4-pin port, paying careful attention to polarity.
- DPC-20 Wiring Diagrams are located on the DPC-20 UI HUB DOCUMENTATION.
Additional downloads can be found on our ACTUATOR RESOURCES page under our Support tab.
Contact Sales directly if you are unable to locate a specific resource download:
Actuator Sales
sales@hiteccs.com
