HLS12-30210
30mm Stroke, 210:1 Gear Ratio, 5mm Lead, PWM Control, Linear Actuator
Controlled using a traditional PWM servo signal, Hitec linear actuators provide optimized motion control for precise and powerful positioning. Whether your application demands a low-profile form factor, or extended linear throws, we have an actuator to suit your needs. Our linear actuators are popular for a myriad of uses including robotics and animatronics, as well as industrial mechanical applications. Programmable stroke and speed settings, power-off position stability, and a variety of mounting options, provide additional functionality and flexibility. Additionally, Hitec linear actuators provide full excursion using a 1050 - 1950µs input range. This feature allows fully compatible use with all radios, by eliminating the requirement for programming extended rates to achieve full motion.
The HLS12-3050 and HLS12-30100 offer more speed, while additional force is available with the high gear ratio of our HLS12-30380 versions.
Applications requiring additional excursion will be better matched to our HLS12-50XX and HLS12-100XX series linear actuators.
Part #: 41005
$109.99
| Linear | |
|---|---|
| Command Protocol |
PWM |
| Weight (g) | Min: 34.00 |
| Operating Voltage (V) | 7.4V |
| Motor Type | Cored Metal Brush |
| Circuit |
Digital |
| Lead Screw | 5 |
| Gear Ratio | 210:1 |
| No Load Speed (mm/s) | 7.5 |
| No Load Current (mA) | 130 |
| Maximum Efficiency Point |
Load (kg / N): 4.4 / 43.60
Speed (mm/s): 5.6 Current (mA): 250 |
| Pear Power Point |
Load (kg / N): 7.7 / 75.09
Speed (mm/s): 4.0 Current (mA): 370 |
| MAX FORCE |
Load (kg /N): 9.9 / 96.89
Speed (mm/s): 2.8 Current (mA): 490 |
| Stall Torque (N) | 12.4 / 121.11 |
| Max Static Force (N) | 25.19 kgf / 247 N |
| Stroke Spec (mm) | 30 |
| Repeatability (mm) | ± 0.2 |
| Max Side Load | 4.08 kgf / 40 N (Extended) |
| Dimensions | 82.0 x 15.0 x 18.0 |
| Case Material | Engineering Plastic & Aluminum Pipe |
| Gear Material | Metal |
Contact Sales directly for accessories and/or replacement parts:
• Case Set
• Gear Set
• Horn Set
Actuator Sales
sales@hiteccs.com
• End Point Adjustments
• Direction
• Fail Safe
• Dead Band
• Speed (Slower)
• Soft Start Rate
• Overload Protection
• Data Save / Load
• Program Reset
Additional downloads can be found on our ACTUATOR RESOURCES page under our Support tab.
Contact Sales directly if you are unable to locate a specific resource download:
Actuator Sales
sales@hiteccs.com
