HLS12-10050
100mm Stroke, 50:1 Gear Ratio, 5mm Lead, PWM Control, Linear Actuator
With 100mm of travel, a 50:1 gear ratio, and a 4.0~8.4V operating voltage range, the HLS12-10050 is ideal for longer stroke applications requiring the fastest transit speeds.
Controlled using a traditional PWM servo signal, Hitec linear actuators provide optimized motion control for precise and powerful positioning. Whether your application demands a low-profile form factor, or extended linear throws, we have an actuator to suit your needs. Our linear actuators are popular for a myriad of uses including robotics and animatronics, as well as industrial mechanical applications. Programmable stroke and speed settings, power-off position stability, and a variety of mounting options, provide additional functionality and flexibility. Additionally, Hitec linear actuators provide full excursion using a 1050 - 1950µs input range. This feature allows fully compatible use with all radios, by eliminating the requirement for programming extended rates to achieve full motion.
Key Performance Specs: The HLS12-10050-6V delivers a maximum force of 2.2 kg / 22 N at 6V, with a no-load speed of 25 mm/s and ±0.5mm repeatability. Its 152×15×18mm form factor and 56g weight keep it compact for tight integration. Engineering plastic housing with hardened metal gears and a 5mm lead screw provide durability for long-duty-cycle industrial environments.
For more force in the same 100mm stroke, see the HLS12-100100, HLS12-100210, and HLS12-100380 variants with higher gear ratios.
Additional force is available with the high gear ratios of our HLS12-100100, HLS12-100210 and HLS12-100380 versions.
Applications requiring less excursion will be better matched to our HLS12-30XX and HLS12-50XX series linear actuators.
Part #: 41012
$109.99
| Linear | |
|---|---|
| Command Protocol |
PWM |
| Weight (g) | Min: 56.00 |
| Operating Voltage (V) | 7.4V |
| Motor Type | Cored Metal Brush |
| Circuit |
Digital |
| Lead Screw | 5 |
| Gear Ratio | 50:1 |
| No Load Speed (mm/s) | 4.1 |
| No Load Current (mA) | 130 |
| Maximum Efficiency Point |
Load (kg / N): 1.2 / 12.11
Speed (mm/s): 23.5 Current (mA): 250 |
| Pear Power Point |
Load (kg / N): 2.1 / 20.59
Speed (mm/s): 17.3 Current (mA): 370 |
| MAX FORCE |
Load (kg /N): 2.7 / 26.64
Speed (mm/s): 8.2 Current (mA): 490 |
| Stall Torque (N) | 3.1 / 30.28 |
| Max Static Force (N) | 25.19 kgf / 247 N |
| Stroke Spec (mm) | 100 |
| Repeatability (mm) | ± 0.5 |
| Max Side Load | 1.53 kgf / 15 N (Extended) |
| Dimensions | 152.0 x 15.0 x 18.0 |
| Case Material | Engineering Plastic & Aluminum Pipe |
| Gear Material | Metal |
Contact Sales directly for accessories and/or replacement parts:
• Case Set
• Gear Set
• Horn Set
Actuator Sales
sales@hiteccs.com
• End Point Adjustments
• Direction
• Fail Safe
• Dead Band
• Speed (Slower)
• Soft Start Rate
• Overload Protection
• Data Save / Load
• Program Reset
Additional downloads can be found on our ACTUATOR RESOURCES page under our Support tab.
Contact Sales directly if you are unable to locate a specific resource download:
Actuator Sales
sales@hiteccs.com
