D131MW
8.5mm, Cored, Standard Voltage, High Torque, Metal Gear Actuator (7.4V)
Featuring a low profile, machined-aluminum case, high-efficiency coreless motor, and dual ball bearings, the competitively priced D131MW is the most durable, longest lasting actuator in its class. Its robust technology is perfect for engineers needing powerful torque and performance in a nano, slim-wing package. With a wide operating voltage of 3.5-8.4V, high response, high resolution circuitry and Smart Sense Technology for servo analytics, the D131MW’s enduring power is a perfect answer for precise control actuation and robotics applications.
Part #: 36131S
$89.99
| Performance Specifications | |
|---|---|
| Command Protocol |
PWM PWM / TTL |
| Operating Voltage (V) |
Min: 4.80
Max: 7.40 |
| Weight (g) | Min: 9.40 |
| Stall Torque (kgf•cm / oz•in) |
Min: 1.7 / 23.61
Max: 2.7 / 37.5 |
| No Load Speed (sec/60°) |
Min: 0.17
Max: 0.11 |
| Running Current (mA) |
Min: 75
Max: 110 |
| Stall Current (mA) |
Min: 700
Max: 900 |
| Circuit |
Digital |
| Rotation |
Standard |
| Operating Voltage (V) |
Min: 4.80
Max: 7.40 |
| Torque Range |
Min (KG/CM): 2.70
Max (N/CM): 0.00 |
| Max Speed (SEC/60) | 0.11 |
| Physical Specifications | |
|---|---|
| Case Size (mm) | 8.50 |
| Dimensions (mm) | 22.0 x 8.5 x 22.8 |
| Weight (g) | 9.40 |
| Motor Type | Coreless |
| Potentiometer |
Conventional |
| Gear Material | 5 Metal |
| Horn Gear Spline | M25T (Ø5) |
| Case Material | Hardened Metal |
| IP Rating |
N / A |
Contact Sales Directly for Replacement Parts:
• Case Set
• Gear Set
• Horn Set
Actuator Sales
Seth Cohen
seth.cohen@hiteccs.com
(858) 737-9220 x311
General Sales
sales@hiteccs.com
Standard Programming Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Overload Protection
- Data Save / Load
- Program Reset
IMPORTANT INFORMATION > DPC-20 PROGRAMMER
- Hardware Type: PC USB-C to 3-pin (PWM/TTL) and 4-pin (RS485/CAN) interface.
- Capable of configuring and testing HITEC digital servo actuators.
- Compatible with various control methods (PWM, RS485, CAN), offering a seamless transition from legacy DPC-11, DPC-485, and DPC-CAN units.
- Different servo actuator series require dedicated UI programs due to variations in communication protocols.
- Ensure you connect the appropriate power supply to the DPC-20 for the connected servo actuator.
- For servo actuators (5/7 Series, 9 Series, D/MD Series), connect to the 3-pin port on the DPC-20, and connect the power supply to the BAT- and BAT+ pins on the 4-pin port, paying careful attention to polarity.
- DPC-20 Wiring Diagrams are located on the DPC-20 UI HUB DOCUMENTATION.
Additional downloads can be found on our ACTUATOR RESOURCES page under our Support tab.
Contact Sales directly if you are unable to locate a specific resource download:
General Sales
sales@hiteccs.com
(858) 737-9220 x311
